Custom Search

To advertise on this site email advertise@goatnetworking.com

How to view IP information for Cisco FirePower?

Site Admin
User avatar
Posts: 367
Joined: Wed Jan 04, 2012 2:36 pm

How to view IP information for Cisco FirePower?

Postby admin » Thu Aug 04, 2016 1:20 pm

How to view

1. SSH or console into the Cisco ASA appliance
2. Session into the FirePower appliance session sfr
3. Login
Username = admin
Password = Sourcefire

4. Issue the following command show network

You will see similar output.

> show network

show network
Show configuration of management interface

> show network
===============[ System Information ]===============
Hostname : Sourcefire3D
Domains : example.net
Management port : 8305
IPv4 Default route
Gateway : 10.1.1.5

======================[ eth0 ]======================
State : Enabled
Channels : Management & Events
Mode :
MDI/MDIX : Auto/MDIX
MTU : 1500
MAC Address : 00:F6:66:77:86:FE
----------------------[ IPv4 ]----------------------
Configuration : Manual
Address : 10.1.1.8
Netmask : 255.255.255.0
Broadcast : 10.1.1.255

----------------------[ IPv6 ]----------------------
Configuration : Disabled

===============[ Proxy Information ]================
State : Disabled
Authentication : Disabled

>

Return to Network Security

Twitter Facebook

Who is online

Users browsing this forum: No registered users and 1 guest